nhrot.blogg.se - Epson pro 3880 printer

EPSON PRO 3880 PRINTER INSTALL
EPSON PRO 3880 PRINTER MANUAL
EPSON PRO 3880 PRINTER SOFTWARE

Verify that you have a perfect nozzle check pattern before printing images.

Follow this by printing another gradient to make sure color is gone before printing images. If color staining is present, do another Power Clean Cycle or a few regular cleaning cycles. Yellow, which is the worst for color staining, will show up in the highlights. Print a nozzle check to make sure all positions are fully printing, then print a test gradient and examine it for color staining.

Perform 3 Power Clean Cycles after installing carts to purge color ink and get Piezography ink from carts to the print head.

Follow this by lifting up on the back of all carts, then close the cartridge bay door. If this is the case, open the cartridge bay door, then push firmly on the cartridge that is not being recognized. If you see a red light or cartridge error on the LCD at this point, one or more chips has not been recognized or seated correctly.

When it stops, the green power light should be on and “ready” displayed on the printer LCD panel.

EPSON PRO 3880 PRINTER INSTALL

Open the cartridge bay door, remove Epson cartridge(s) and install refillable cart(s) into printer (please refer to the refillable carts instructions for the correct way to fill and prime), then close the cartridge bay door.

Test the printer with Epson inks to verify that it functions perfectly, as described above.

EPSON PRO 3880 PRINTER MANUAL

A full manual for Piezography can be downloaded with the free Piezography Community Edition.

EPSON PRO 3880 PRINTER SOFTWARE

This software has quickly become a defacto utility for anyone wanting to properly color manage their printing workflow. Additionally, Piezography on the Mac requires the use of Print-Tool. We provide our own guides to our suggested use of QuadToneRIP, so that you can get the best results from that product. Installation instructions and support of that software is provided by the manufacturers of those software. Most Piezography systems depend upon the QuadtoneRIP software with which to control the ink shades.

You must refer to the shade placement chart provided here on this document. Whether you use refillable cartridges, CIS, or pre-filled cartridges (available outside the USA), the placement of the shades of Piezography ink are critical and not arbitrary. If you lost your refillable cartridge instructions, please go to our main support page to view the cartridge instructions. If you are installing user refillable cartridges, please refer to the installation instructions provided with the refillable cartridges. If you are installing a Continuous Ink System (CIS), please refer to the installation instructions provided with the CIS. Use these procedures to convert your color printer to a Piezography printer.